Drainage Fitting Branch Junction upvc-tee-in-uae
PVC, PPR & HDPE Pipes
Waste JunctionSwept BranchSolvent Socket32 – 160 mm

uPVC Drainage Tee (Equal & Swept Branch)

Tee · uPVC · BS EN 1329 · UAE stock

A three-way uPVC fitting that joins a waste branch into a running drain or stack. The swept inlet guides flow in the direction of travel so branches discharge cleanly without backing up.

Material
uPVC
Type
Equal / swept
Joint
Solvent socket
Sizes
32 – 160 mm
Same-day quote Bulk & wholesale UAE & GCC delivery

Quality Assured

Checked stock, standard-compliant

Wide Size Range

Full sizes, ratings & materials

Ex-Stock, Dubai

Ready inventory, UAE & GCC delivery

Bulk & Wholesale

Project quantities at best price

Overview

uPVC Tees for Drainage Branch Connections

In drainage, a uPVC tee is usually a junction rather than a true right-angle split. The branch meets the main at a slight angle or with a curved, swept entry so that water and solids enter in the direction of flow. This keeps the main running freely and reduces the chance of a branch discharging back up the opposite line, a problem with sharp square tees.

We stock equal tees from 32 to 160 mm and swept branch tees for soil stacks, with reducing junctions available to order. All are solvent socket fittings to BS EN 1329 and match our uPVC pipe, elbows and reducers. On soil stacks the swept pattern is the usual choice, while equal tees serve vents, waste branches and floor drain lines where flow is lighter. Contact Hamza Fasteners in Deira, Dubai for prices.

Technical Data

uPVC Tee datasheet and specifications

Reference data for uPVC Tee. Confirm exact size, rating and material for your order with our team.

This datasheet shows representative sizes for reference only. uPVC Tee is supplied in the full range of sizes, ratings and materials — not a single option. Tell us what you need and we will confirm exact availability, specification and price.

Configurations · BS EN 1329

Common uPVC drainage tee configurations

HAMZA FASTENERS
Reference
TeeMainBranchTypical use
40 x 4040 mm40 mmSink and shower waste
50 x 5050 mm50 mmFloor drain lines
75 x 7575 mm75 mmWaste stacks
110 x 110110 mm110 mmSoil stack branch
110 x 50110 mm50 mmWaste into soil stack
160 x 110160 mm110 mmStack into building drain
Reducing junctions supplied as tees or as an equal tee with a reducer. 32 mm equal tees also stocked.
Datasheet · UPVC-TEE

Product Specification

HAMZA FASTENERS
Rev. 01
Product TypeDrainage tee / junction
MaterialuPVC (PVC-U)
StandardBS EN 1329-1
ServiceGravity drainage, non-pressure
End ConnectionSolvent sockets, three ways
Size Range32 – 160 mm
Install swept tees with the curve pointing in the direction of flow.
Size
32 – 160 mm
Material
uPVC
Type
Equal / swept
Full range supplied — sizes, ratings & materials
Size Range
32 – 160 mm
Materials
uPVC, grey
Standards
BS EN 1329-1
Pressure
Non-pressure, gravity
Ends / Types
Equal, swept, reducing
Also Available
uPVC elbows, reducers, pipe
Request Full Datasheet & Price Need a specific size, rating or material? Send us your requirement.
Applications

Where uPVC Tee is used

Soil Stacks

WC branch connections

Bathroom Waste

Combining basin and shower

Vent Systems

Vent pipe take-offs

Building Drains

Stack to ground drain

Restaurants

Kitchen waste junctions

Workshops

Floor drain networks

Availability & Supply

uPVC Tee supplier across the UAE, GCC and Africa

Stocked in Deira, Dubai and delivered fast across the region. Wherever you are building, we supply in stock and project quantities.

Hamza Fasteners is a trusted uPVC Tee supplier in Dubai and across the United Arab Emirates — Abu Dhabi, Sharjah and Ajman — with regular export supply to Saudi Arabia (Riyadh, Jeddah, Dammam), Qatar (Doha), Kuwait City, Oman (Muscat) and key East and West African markets including Tanzania (Dar es Salaam), Kenya (Nairobi and Mombasa), Nigeria (Lagos) and Ethiopia (Addis Ababa). Looking for a "uPVC Tee supplier near me" or the best price in your city? Send us your requirement for a same-day quote.

United Arab Emirates

  • Dubai
  • Abu Dhabi
  • Sharjah
  • Ajman

Saudi Arabia

  • Riyadh
  • Jeddah
  • Dammam

GCC

  • Doha, Qatar
  • Kuwait City
  • Muscat, Oman

Africa

  • Tanzania
  • Kenya · Nigeria
  • Ethiopia
FAQ

Common questions

What is a swept tee and why use it?
A swept tee has a curved branch that turns flow into the main gradually. It reduces turbulence and stops waste from one branch pushing up another, so it is preferred on soil stacks.
Can a uPVC drainage tee be used for a vent?
Yes. Tees are used to connect vent pipes to stacks and branches. Fit the tee the right way round so drainage flow is not directed into the vent. Vent tees should be fitted above the highest fixture on the branch.
Do you only stock equal uPVC tees?
No. We carry equal tees from 32 to 160 mm and swept tees for soil work, and supply reducing combinations such as 110 x 50 and 160 x 110 mm.
How much does a uPVC tee cost in Dubai?
It depends on size and type. Send the list of tees you need on WhatsApp and we will quote with your other drainage fittings. Swept and equal tees are priced differently, so list the type you need.
Can you deliver drainage tees across the UAE?
Yes. We deliver across the UAE and dispatch to KSA, the GCC and Africa. Drainage fittings can travel with pipe and solvent cement on one consignment, and small orders can be collected from our store in Deira.

Need uPVC Tee for your project?

Share the size, material, rating and quantity. We will confirm stock and send a quick quote with the datasheet and best price.

Email Us WhatsApp Enquiry Call Us sales@hamzafasteners.com · Deira, Dubai
Download Catalogue